-
It is a very troublesome thing that solid control equipment has something wrong in the process of producing oil exploitation. To reduce the generation of failure, routine maintenance is very necessary. Here are some knowledge of solids control equipment repair and maintenance. 1. When stop using shale shaker, the mud on...
-
1.In general, it should also be installed in parallel two shale shaker (can also according to user requirements of parallel three), so that when a screen failure, it can be changed another, without influencing the drilling process. When use of double pump drilling, or fluid viscosity is high, the two shaker can be used...
-
The solids control system is composed of some mud cleaning equipment, mud tank and auxiliary equipment. Solid control full facilities including the process of drilling fluid system by the returning system circulation to the drilling pump suction. The solid control system on the ground laying are three type:I,T...
-
In the design requirements of solid control systems, it is needed to configure the corresponding mud processing equipment, in accordance with the SY/T6223-2005 “drilling fluid purification equipment use and maintenance” requirements, selection of solid control equipment needs to follow the following principles:...
-
Effective drilling fluids solids control equipment can be attributed to the overall performance of all the components of the drilling mud systems. Conditioning the drilling fluids with the goal of dramatically lowering maintenance cost, avoiding excessive chemical treatment and maintaining mud systems volume will decrease...
-
Shale shaker is consists of vibration motor, compound rubber spring, Stainless steel screen mesh framework, Screen box and start switch. The product through the vibration motor which drives the eccentric block moves high speed. The strong centrifugal force acts on the elastic vibrator make the bottom of the screen...
-
Decanter centrifuge is a important equipment in solid control system. It is widely used in drilling waste management system and oilfield mud circulation system. Decanting centrifuge separate the suspending fluids using the principle of centrifugal action, the suspending fluids is pushed into the rotor drum through...
-
Drilling mud generally adopts centralized preparation and dispersion method for preparation of combination. Usually the drilling company has mud station, according to the geological conditions of drilling mud area prepared to transport to drilling platform, it is easy to centralized management. Each platform has daily mud...
-
Jet mud Mixer typically consists of a sand pump and a jet mixing funnel connected by valves and manifolds and they are fixed and installed on a base. Jet mud mixer device can also be manufactured into a hybrid according to the customers’ requirements. The compound jet mud mixing device consist of multiple sand pump
-
Brightway Cyclone Desander is the second phase in the solids control equipment in the drilling fluids control system. The main role is separating the solid in 47 ~ 76um from the drilling fluids. The principle of the Cyclone desander is making use of the centrifugal gravity to remove the drilling mud solid. After the Drilling...
